世行贷款中国塑料垃圾减量项目——宁波城镇生活垃圾智慧分类、收集、循环利用示范项目全品类智能柜整体采购中标公告

序号

投标人名称

唱标价

（人民币）

评标价

（人民币）

评标结果

1

****点击查看

153,886,393.20

153,886,393.20

该投标人的投标满足资格标准，实质性响应招标文件，技术和财务综合得分为100分，排名第一，推荐中标。

2

上****点击查看研究所有限公司、上****点击查看集团****点击查看公司的联合体

187,624,390.20

187,624,390.20

该投标人的投标满足资格标准，实质性响应招标文件，技术和财务综合得分为84.68分，排名第二。

3

东软庆宝联合体

/

/

关于“有制造经验和技术能力”方面，该投标人针对招标文件规定的7项相关设备制造商提供的合同业绩时间均为2024年1月1日之前的，且每项设备的数量累计均未达到1000件，未能实质性满足招标文件规定的“在投标截止日期前1年内（2024年1月1日至今）”和“至少具有1000件销售本项设备的销售业绩”的要求。

因此，评标委员会一致认为，该投标人在“有制造经验和技术能力”方面与招标文件资格审查要求存在实质性重大偏离，未能通过资格审查，其投标被拒绝。

另外，在初步审核的技术评审中，经审查，该投标人未提供货物“电容触摸屏（21.5/32寸）”、“照明灯带（435/685/935）”、“IC卡一体化模组”、“扫码IC刷卡器”、“RFID 标签”、“RFID 读写器/一体机”、“仓内AI摄像头”、“仓外行为监控摄像头”、“称重系统”、“除臭装置”、“塑料垃圾桶”、“物联网工控主机”、“单仓版控制器”和“静电粉末喷涂成膜后的质量要求”的设备出厂检验报告（需有制造商盖章）、设备技术规格说明书、设备现场运行报告、且未提供全部制造商的质量管理体系认证证书。

4

****点击查看公司、**移动****点击查看公司

/

/

在初步审核的商务评审中，****点击查看委员会评审发现，该投标人递交的投标保函是由“**市****点击查看公司”出具，****点击查看公司，非招标文件规定的“中华人民**国境内地****点击查看银行****点击查看银行”。

根据招标文件第二章ITB 19.3(a)的规定，“（a）银行保函：保函受益人应为“****点击查看”。保函须由在中华人民**国境内地****点击查看银行****点击查看银行按照本招标文件规定的投标保函格式（详见“第四章-投标格式”）出具，......”。

因此，评标委员会一致认为，该投标人未能实质性满足招标文件第二章ITB 19.3(a)的规定，不能通过初步审核的商务评审，其投标被拒绝。

另外，在初步审核的技术评审中，经审查：（1）该投标人未提供招标文件第七章 货物需求一览表“7. 检查和试验”部分要求的相关承诺函（或检测报告）；（2）针对货物“电容触摸屏（21.5/32寸）”、“照明灯带（435/685/935）”、“IC卡一体化模组”、“扫码IC刷卡器”、“RFID 标签”、“RFID 读写器/一体机”、“仓内AI摄像头”、“仓外行为监控摄像头”、“称重系统”、“除臭装置”、“塑料垃圾桶”、“物联网工控主机”、“单仓版控制器”和“静电粉末喷涂成膜后的质量要求”提供的设备出厂检验报告和设备技术规格说明书，仅复制了招标文件中的技术要求，未能具体响应；（3）提供的设备现场运行报告由该投标人自行出具并且未盖公章；（4****点击查看制造厂商“**一键****点击查看公司”的质量管理体系认证证书，****点击查看制造厂商的质量管理体系认证证书。

中标人名称

****点击查看

中标人地址

**省**市高新区浪潮路1036号S02楼

授标价

人民币153,886,393.20元

合同范围

合同签订后，总共预计分为20批次交货，计划每批次交货数量：智能柜箱体343仓、厢房门板86仓、两网融合改造箱体45套、数据追溯系统改造61套；每批次下单后交货时间：5-45天；每批次下单间隔时间预计30天左右，合同交货期不超过730 天（2年），最终以买方提供的采购订单交货计划为准。

工期

项目负责人

姓名

刘瑞慧

项目负责人

相关证书和编号

IPMA（国际项目经理资质认证）证书

（证书编号：CN2006C0598）

No.

Name of Bidder

Annouced Bid Price

(CNY)

Bid Price

(CNY)

Results

1

Inspur

153,886,393.20

153,886,393.20

The bidder meets the qualification criteria, substantially responds to the Bidding Documents of this project. The combined technical and financial score is 100. It has been ranked first and recommended as the successful bidder.

2

Jv of Shanghai Electrical Automation D R Institute Co.,Ltd. and Shanghai Ideal Information Industry (Group) Co., Ltd.

187,624,390.20

187,624,390.20

The bidder meets the qualification criteria, substantially responds to the Bidding Documents of this project. The combined technical and financial score is 84.****点击查看. It has been ranked second.

3

JV of Neusoft and Qingbao

/

/

Regarding the aspect of “Manufacturing experience and Technical Capacity”, the contract performance time provided by the bidder for the 7 related equipment manufacturers stipulated in the bidding documents is all before January 1, 2024, and the cumulative quantity of each type of equipment has not reached 1,000 units. It failed to substantially meet the requirements stipulated in the bidding documents for “Within one year prior to deadline for submission of Bids (i.e. from January 1, 2024 to the present)” and “have a sales performance of at least 1000 units of this equipment”.

Therefore, the bid evaluation committee unanimously held that the bidder had a substantial and significant deviation from the qualification review requirements of the bidding documents in terms of “Manufacturing experience and Technical Capacity”. Therefore, this bidder did not pass the qualification review and its bid was rejected.

In addition, during preliminary review and Techical review, the bidder did not provide the ex-factory inspection of the equipment (must bear the manufacturer's official seal), technical specification manual of the equipment and field operation of the equipment of Goods “Capacitive Touch Screen (21.5/32-inch)”, “Lighting Strip (435/685/935)”, “IC Card Integrated Module”, “QR Code Scanning IC Card Reader”, “RFID Tag”, “RFID Reader/Writer or All-in-one Device”, “In-Bin AI Camera”, “Off-bin Behavior Surveillance Camera”, “Weighing system”, “Deodorizing device”, “Plastic Trash Bin”, “IoT Industrial Control Host”, “Single-Bin Version Controller” and “Quality Requirements for Electrostatic Powder-Coated Film”, and did not provide all the equipment manufacturer’s quality management system certification.

4

Kangjie Technology Group Co., Ltd. and Jiangsu Mobile Information System Integration Co., Ltd.

/

/

After preliminary review and commercial review by the bid evaluation committee, the bid guarantee submitted by the bidder was issued by “Chongqing Jinyu Engineering Guarantee Co., Ltd.” This company is a guarantee company and does not refer to "a municipal-level branch or higher within the People’s Republic of China" as stipulated in the tender documents.

According to the ITB 19.3(a) of Section II of the bidding documents, “(a) Bank Guarantee: The beneficiary of the guarantee shall be “Ningbo Dabashou Ecological Digital Technology Co., Ltd.”. The guarantee must be issued by a municipal-level branch or higher within the People’s Republic of China in accordance with the guarantee format specified in this bidding document (as detailed in "Section IV - Bidding Forms")......”.

Therefore, the bid evaluation committee unanimously held that the bidder failed to substantially meet the requirements of Section II ITB 19.3(a) of the bidding documents and could not pass the Preliminary Commercial Evaluation, and its bids were rejected.

In addition, during preliminary review and Techical review, the bidder did not provide the relevant commitment letters (or test reports) in the “7. Inspections and Tests” section in Section VII Schedule of Requirements. (2)the bidder’s ex-factory inspection of the equipment and technical specification manual of the equipment of goods “Capacitive Touch Screen (21.5/32-inch)”, “Lighting Strip (435/685/935)”, “IC Card Integrated Module”, “QR Code Scanning IC Card Reader”, “RFID Tag”, “RFID Reader/Writer or All-in-one Device”, “In-Bin AI Camera”, “Off-bin Behavior Surveillance Camera”, “Weighing system”, “Deodorizing device”, “Plastic Trash Bin”, “IoT Industrial Control Host”, “Single-Bin Version Controller” and “Quality Requirements for Electrostatic Powder-Coated Film” only copied the technical requirements in the bidding documents and failed to provide specific responses .(3)field operation of the equipment provided by the bidder was issued by the bidder itself and was not stamped with the official seal. (4)the bidder only provided the equipment manufacturer’s quality management system certification of “Jiangsu Yijianlian New Energy Technology Co., LTD.”, but did not provide the equipment manufacturer’s quality management system certification of other equipment manufacturers.

The name of Successful Bidder

Inspur

The name of Successful Bidder

Building S02, No. 1036, Langchao Road, High-tech Zone, Jinan City, Shandong Province

Proposed Contract Price

CNY 153,886,393.20

Expected completion period

After the signing of the contract, the total delivery is expected to be divided into 20 batches. The planned quantity for each batch is as follows: 343 bins of intelligent cabinet enclosure, 86 bins of compartment door panel, 45 sets of enclosure reconstructed for integration of urban sanitation system and renewable resource system, 61 sets of data traceability systems reconstruction; The delivery time after each batch order placement is 5 to 45 days; the interval between each batch order is expected to be approximately 30 days, the contract delivery period shall not exceed 730 days (2 years), with the final schedule subject to the delivery plan specified in the purchase orders provided by the Purchaser.

construction period

Project Leader

LIU Ruihui

Relevant certificates and numbers of Project leader

IPMA certificate

(certificate No：CN2006C0598)